Indicator Cancelling Device

Just a quick one….

This little device is used to cancel the indicators.  It normally has a little tab which inserts into a little hole at the back of the steering wheel to give it a positive drive.  Mine was bent over and broke when I tried to straighten it up.

I solved the problem by soldering a small piece of steel wire into the groove where the tab normally is and then bent it to line up with the hole in the back of the steering wheel boss.

img_3875 img_3876 img_3877 img_3878

Advertisements

2 thoughts on “Indicator Cancelling Device

    1. I believe it will be fine. The loads are not really on the solder – it really just keeps the wire (which is a snug fit) captive in the small groove of the device which takes the side loads from the rotating wheel.

      I guess time will tell if it is enough!

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s